Overclocking an SSD – a concept that seemed impossible not long ago. However, one expert has decided to prove that better performance can be achieved with this type of device. Modifying an SSD, however, comes with higher temperatures and may affect its lifespan.
Until now, computer overclocking mainly focused on the processor, RAM, and graphics card. Now it’s time for the SSD. Gabriel Ferraz, a renowned expert in computer technology, has published a video demonstrating how an SSD can be overclocked.
Ferraz used a 240GB RZX PRO SSD with very low clock speeds. The implemented Silicon Motion SM2259XT2 controller was operating at 400 MHz, and the Kioxia BiCS4 memory chips were running at a mere 193.75 MHz. However, these frequencies can be increased up to 550 MHz for the controller and 800 MHz for the memory chips.
To overclock the SSD, it was connected to a USB 3.0 port with a JMS578 controller through a special SATA III adapter. This allowed changing the disk parameters using the MPTools tool. However, it should be noted that overclocking an SSD is a complicated process and should be done with caution.
The result of the overclocking was a noticeable improvement in small sample read/write tests and data access latency. The SSD achieved a 20% higher score in the 3DMark Storage Benchmark and an 11% improvement in the PCMark 10 Full System Drive Benchmark.
However, it’s important to consider that overclocking the SSD caused a temperature increase from 40 to 45 degrees Celsius. There is also a risk of reducing the SSD’s lifespan. Therefore, overclocking an SSD, although intriguing, should only be done when fully aware of these potential consequences.
Overclocking an SSD is another step towards increasing computer performance, but it requires caution and is intended for more advanced users. In any case, the decision to overclock an SSD should be made at your own risk due to the potential risks of overheating and reduced hardware lifespan.
Q&A:
1. What is SSD overclocking?
SSD overclocking is the process of changing the parameters of an SSD to achieve better performance.
2. Which computer components have been commonly overclocked so far?
So far, the main components that have been overclocked are the processor, RAM, and graphics card.
3. Which SSD did Gabriel Ferraz use in his experiment?
Gabriel Ferraz used a 240GB RZX PRO SSD.
4. What are the default clock speeds of the controller and memory chips of this SSD?
The Silicon Motion SM2259XT2 controller has a clock speed of 400 MHz, and the Kioxia BiCS4 memory chips have a clock speed of 193.75 MHz.
5. What are the potential effects of overclocking an SSD?
Overclocking an SSD can lead to increased temperatures and a reduced lifespan.
6. What benefits did overclocking bring to the test?
The overclocked SSD achieved higher scores in both the 3DMark Storage Benchmark (20% improvement) and the PCMark 10 Full System Drive Benchmark (11% improvement).
7. What was the purpose of using a special SATA III adapter?
The SATA III adapter was used to connect the SSD to a USB 3.0 port with the JMS578 controller in order to change the disk parameters.
8. Is overclocking an SSD a simple process?
No, overclocking an SSD is a complicated process that requires caution.
9. Who is overclocking an SSD intended for?
Overclocking an SSD is intended for more advanced users.
10. What precautions should be taken before overclocking an SSD?
Before overclocking an SSD, one should be aware of potential consequences such as increased temperatures and reduced lifespan. The decision to overclock should be made at your own risk.
Vocabulary:
– SSD overclocking (podkręcanie dysku SSD)
– performance (wydajność)
– modification (modyfikacja)
– clock speed (taktowanie)
– controller (kontroler)
– memory chips (kości pamięci)
– adapter (przejściówka)
– parameters (parametry)
– tool (narzędzie)
– read/write test (test odczytu/zapisu)
– rating (ocena)
– benchmark (benchmark)
– latency (opóźnienie)
– data access (dostęp do danych)
– reduction in lifespan (skrócenie żywotności)
The source of the article is from the blog combopop.com.br